Ir para o conteúdo

Trabalhos

Jobs on QFieldCloud perform heavy operation with project files and layers within QGIS. Jobs are created in response to certain user actions.

Once a job is created, it is added to the project's job queue and waits for available QFieldCloud resources to run. At any given moment only one job can run per project. The rest of the queued jobs will perform in the same order as in they entered the queue.

Each job consists of one or more steps and each step is responsible for one self contained task on the project. QFieldCloud supports three predefined job workflows: process_projectfile, package and delta_apply.

While running, jobs are writing log messages which are available on project's jobs page for jobs that have reached a final status FINISHED or FAILED.

Jobs have access to project secrets.

Nota

Todos os trabalhos podem ser ativados para usar a API QFieldCloud.

Aviso

  • Any of the triggering conditions described on this page might change without notice.
  • All jobs must finish within 10 minutes or they will result in a timeout error and will be terminated.

Tipos de trabalhos

Process project file (process_projectfile) job

The process project file job is used to extract details about the project configuration and project layers, such as project CRS, layer CRS, layer name, layer validity etc. QFieldCloud validates the uploaded QGIS project file (.qgs/.qgz), as well as the supporting GeoPackages, TIFFs and other data source files. It also validates remote connection to PostGIS, WFS, WMS and other online data sources. QFieldCloud will open the project file in a QGIS instance on the server to extract all the necessary information.

Triggers

This job is triggered every time a file is uploaded to QFieldCloud, unless at least one of the following condition are valid:

  • No QGIS project file (.qgs/.qgz) has been uploaded yet.
  • The uploaded file is within the DCIM directory. Those files are assumed to be irrelevant to project validity.
  • There is already a process_projectfile job in PENDING status.

Troubleshoot

A process_projectfile job might result in FAILED status. Check the non-exhaustive list of causes below:

  • The uploaded QGIS project file (.qgs/.qgz) is unreadable, incomplete, broken or wrong. Try to reupload the QGIS project file.
  • QGIS is crashing after opening the project file. Try to identify the layer that is causing the crash by removing one layer at time from the project and reuploading the QGIS project file.

Note

Even if a process_projectfile job results in a SUCCESS status, it does not mean the project is properly configured. The SUCCESS status just states the project has been successfully opened and all the needed information has been extracted.

Package (package) job

The package job convert a QGIS project to a QField project, the same way it is done on QGIS via QFieldSync. The package job will prepare all layers marked as "Offline editing" to a single GeoPackage.

Triggers

This job is triggered every time the Download or Synchronize buttons are pressed on QField. Unless at least one of the following condition are valid:

  • The project has never run a process_projectfile job that resulted in SUCCESS status.
  • There is already a package job in PENDING status.
  • The project does not contain online vector layers (PostGIS, WFS etc), the latest package job result was SUCCESS and there were no file uploads, nor change uploads.

Troubleshoot

A package job might result in FAILED status. Check the non-exhaustive list of causes below:

  • The project has never run a process_projectfile job that resulted in SUCCESS status.
  • Some of the project layers are inaccessible from QFieldCloud. Make sure all files are uploaded and all credentials to online layers (PostGIS, WFS etc) are stored within the QGIS project file.

Delta apply (delta_apply) job

Delta apply jobs is responsible to make all pushed QField changes permanent.

Triggers

This job is triggered every time a Synchronize or Push changes button is pressed on QField, or Apply pending changes button is pressed on the Changes project page. If any of the following condition are valid:

  • The project never run a process_projectfile job that resulted in SUCCESS status.
  • There is already a delta_apply job in PENDING status.

Troubleshoot

A delta_apply job might result in FAILED status. Check the non-exhaustive list of causes below:

  • At least one of the online databases (PostGIS/WFS) used in the QGIS project reset the connection.
  • O projeto é muito grande resultando na falha da execução do trabalho.
  • There are hidden files and directories within the project that are preventing the normal work of QFieldCloud. Hidden files and directories are those starting with a leading dot (.).

Re-apply changes in QFieldCloud

  1. Click on the project's name under My projects.
  2. Go to the Changes section. (Changes are sorted from latest to oldest)
  3. Find the specific changes you want to reapply.
  4. In the Action column on the right, click on the dropdown list.

  5. Choose the desired action to reapply the changes.

    • Re-apply Specific Changes: If you need to reapply specific changes, select each change you want to re-apply and click Re-apply.
    • Re-apply Recent Changes: If you prefer to reapply the most recent modifications made to the project, identify the initial change you want to restore, then select Re-apply this and newer changes.

Finally, click the Save all button.

Re-apply changes
Re-apply changes

Troubleshoot job logs

When running a job, usually you can find a step in the logs called "Check project layers" that prints a table with all the project layers and status next to them.

Os possíveis status são:

  • ok - The layer loads correctly on QFieldCloud.
  • invalid_dataprovider - the layer's data provider is invalid. Usually additional information is shown in the "Provider Summary".
  • invalid_layer - This errors should happen very rarely if ever. The data is loaded correctly, but for some reason QGIS reports the layer as invalid.

Unable to connect to service "{SERVICE}".

QFieldCloud tries to connect to a PostgreSQL service that is not available. You should need to create a new pgservice secrets so QFieldCloud can connect to the PostGIS service.

Unable to connect to host "{HOST}".

QFieldCloud cannot establish a connection to the given {HOST}. Your service is not accessible from the QFieldCloud server. You might been to ask your IT department to whitelist the QFieldCloud IP.

Não foi possível conectar ao servidor "localhost".

You have uploaded a layer that connects to a database/service on your local machine. Either remove that layer or replace it with a layer source accessible by QFieldCloud.

File "{FILENAME}" missing.

The file {FILENAME} (e.g. /tmp/rndstr/files/data.gpkg) is not found on the QFieldCloud server and cannot be opened. There are two things that should be checked:

  • Whether the file has been uploaded to the cloud. You can check this in Project Settings -> Files page on QFieldCloud or QFieldSync.
  • Making sure the file is uploaded with the same relative path as on your PC. Please note that all project files should be within the same project directory or subdirectory as the .qgs/.qgz QGIS project file. Please also note the directory names should be preserved too, for example if a file is stored in data/data.gpkg, make sure the data directory exists on QFieldCloud too.